Skip to content

FREE SHIPPING FOR PURCHASES ABOVE $50

Kore Aviation Headsets Now Standard in Philippine Flight Schools - KORE HEADSET LLC

Kore Aviation is proud to announce a major milestone in its international growth: our KA-1 aviation headset is now the standard headset included in pilot starter kits across flight schools in the Philippines, thanks to a new partnership with Harris Aviation Solutions Philippines Inc.

This collaboration marks Kore Aviation’s official entry into the Philippine flight training market and further cements our commitment to supporting the next generation of aviators across the globe.

Equipping Student Pilots From Day One

Through this distribution agreement, Harris Aviation—led by CEO Harris Camposagrado—will provide Kore Aviation’s KA-1 headset as part of the student pilot kits issued to cadets at training institutions nationwide. As a respected supplier serving general aviation and training organizations, Harris Aviation is uniquely positioned to deliver high-quality gear where it matters most: right at the beginning of a pilot’s journey.

About Harris Aviation Solutions Philippines Inc.
Harris Aviation Solutions Philippines Inc. is a leading aviation distributor providing essential flight gear, pilot kits, and equipment to flight schools, instructors, and general aviation customers throughout the Philippines. With a mission to make quality aviation tools accessible, Harris Aviation supports the training and development of the next generation of aviators.

“We’re thrilled to partner with Kore Aviation to bring their headsets to flight schools across the Philippines,” said Camposagrado. “The KA-1 is a perfect fit for student pilots: reliable, comfortable, and built to perform under rigorous training conditions.”

Designed for Flight Training, Built for the Future

The KA-1 headset is a trusted favorite among student pilots and instructors in the U.S.—and for good reason. It delivers 24 dB of passive noise reduction, a noise-canceling electret microphone for crystal-clear communication, dual volume controls, and gel ear seals that offer all-day comfort. With an AUX input, pilots can plug directly into apps like ForeFlight for real-time audio alerts, navigation cues, and weather updates—making it the ideal headset for today’s connected cockpit.

“This marks a key milestone for Kore Aviation as we expand our reach into Asia,” said Min Kim, CEO of Kore Aviation. “We’re proud to support the growth of aviation in the Philippines and honored that our KA-1 headset will be part of the learning experience for so many future pilots.”

Supporting Aviation Where It Starts

This partnership represents more than just distribution—it’s a shared mission to make quality aviation tools accessible and to empower flight schools with gear that supports learning and performance. By putting the KA-1 in the hands of student pilots early on, Kore Aviation and Harris Aviation are investing in safety, clarity, and confidence from day one.

We believe every pilot deserves gear they can count on. That’s why we design all Kore Aviation headsets—like the KA-1—with durability, comfort, and communication performance at their core. Whether you’re flying circuits in a Cessna 172 or preparing for your first cross-country, the KA-1 delivers the experience you need to focus on what matters: flying.


To learn more about the KA-1 or to explore our full headset lineup, visit us at www.koreheadset.com.

Let’s take flight—together.

Previous Post Next Post
KORE Aviation
Hi There 👋
We are KORE Aviation, feel free to ask us any questions.

Your Recent Orders

GOT A QUESTION

Visit our FAQs for the fastest way to get information.

VIEW FAQs

Product Support

Quick links to help you with your product:

Headset Guide

Your headset may come with either a single or dual volume control located on one or both ear domes. Rotate the knob to adjust the volume to a comfortable level.
If your headset includes a mono/stereo switch located in the Y-block on the main headset cable, select the setting that matches your equipment. Use the stereo position for stereo audio sources. For all other applications, use the mono position. Refer to your aircraft radio or general aviation intercom manual for guidance on the correct setting.
Your headset is equipped with either a full-flex or wire boom that can be bent and positioned for accurate microphone placement. Adjust the boom so the microphone sits at the corner of your mouth, about ⅛ inch from your lips. Do not force the boom past its natural stopping point.
Loosen the oversized thumb nut on the side of the headset by hand. Adjust the headband up or down until the ear domes fit comfortably over your ears. Tighten the thumb nut to lock the position.
Replace the ear seals if they become worn, torn, or hardened over time. To install a new ear seal, insert the lip of the seal into the groove of the ear dome. Hold the dome firmly and keep the top of the ear seal in place while working the lip into the groove around the dome. You may need to pull slightly to ensure the seal fits tightly.
Replace the headband if it becomes worn, torn, or hardened. To replace it, grasp the top liner and gently open the Velcro seam to separate it from the inner strip. Remove the old headband and insert the new one.

General Maintenance

Regular maintenance will help keep your headset performing properly and looking like new.

Do not use harsh chemicals or abrasive cleaners, and do not submerge any part of the headset in water.

Use a clean, damp cloth to gently wipe the ear cups and head pad. For heavily soiled areas, use a mild solution of water and household liquid detergent.

To clean the microphone and plugs, wipe them with a clean cloth lightly dampened with alcohol.

Ear seals and microphone muffs are replaceable and should be changed as needed when they become worn.

Returns & Warranty

Our return policy is 30 days. If 30 days have passed since your purchase, unfortunately we can’t offer a refund or an exchange. To be eligible for a return, the item must be unused and in the same condition that it was received in. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase from original store.
Once your return is received and inspected, we will send an email to notify that we have received the returned item. If it meets the requirements above, then the refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 15 business days.
Please note that banks have different processing time periods. If you haven’t received a refund in 15 business days, please check with the bank as it may still be processing. If you still have not received your refund, please contact us at help@koreheadset.com.
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at help@koreheadset.com.
Warranty is limited to original purchaser and covers defects in material and workmanship for a period of five (5) years from date of original purchase. Warranty is not valid if our inspection shows that the equipment has been subjected to negligence, misuse or accident, or if it has been tampered with, installed, or altered in any way. All products must be shipped to our address, freight prepaid. Email help@koreheadset.com with a copy of your dated sales receipt and a detailed description of the problem to initiate a claim.
To return your product, please contact us at help@koreheadset.com. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

UNBOXING VIDEOS

Add an H1 unboxing video in the theme settings.

Send Us a Message