FREE SHIPPING FOR PURCHASES ABOVE $50

Shop KA-1 | BEST SELLER

Search

KORE Textured Gel Ear Seal (1 Pair)
KORE Textured Gel Ear Seal (1 Pair)
KORE Textured Gel Ear Seal (1 Pair)
KORE Textured Gel Ear Seal (1 Pair)
KORE Textured Gel Ear Seal (1 Pair)
KORE Textured Gel Ear Seal (1 Pair)
KORE Textured Gel Ear Seal (1 Pair)

KORE Textured Gel Ear Seal (1 Pair)

KORE Textured Gel Ear Seal (1 Pair)

$ 16.99
$ 16.99
Shipping calculated at checkout.
Quality tested
Quality tested
American company
American company
Pilot-approved
Pilot-approved

Still deciding?

Your satisfaction is our priority. Enjoy free returns within 30 days, making every purchase completely risk-free.

From our door to yours, our fulfillment network ensures fast, secure delivery.

Our customer support is just a click away, ready to provide friendly help.
Textured Gel Ear Seal

Textured Gel Ear Seals for Cooler, More Comfortable Flights

Upgrade your headset with textured silicone gel ear seals designed to reduce pressure, improve airflow, and enhance noise isolation. The breathable textured surface helps minimize heat and stickiness, delivering a more comfortable fit during long flying sessions.

+

Ultra plush

+

Block out noise for increased noise reduction

Compared to polyurethane foam ear seals

+

Maximum breathability and comfort

Compared to regular standard foam

✔

Ultra plush

✔

Block out noise for increased noise reduction

Compared to polyurethane foam ear seals

✔

Maximum breathability and comfort

Compared to regular standard foam

Frequently Asked Questions

What makes these ear pads more comfortable than standard options?

Made from ultra-plush silicone gel, these ear pads provide exceptional softness and breathability, preventing ear pain even during extended headset use.
<strong>Instruction: Gel Ear Seal Installation</strong>

Instruction: Gel Ear Seal Installation

  • Locate the small hole at the bottom of the ear seal.
  • Insert the top flap over the headset ear cup lip.
  • Hold the flap in place with your thumb.
  • Use your index finger to pull the cover along the ear cup lip.
  • Ensure the ear seal fully covers the ear cup.
​

HEAR FROM OUR CUSTOMERS

"Overall, they just make flying feel a little more cozy and less fatiguing, which I didn’t realize I needed until now! Definitely a small upgrade that makes a big difference!!"

Ava, Student Pilot

"The ear gel is amazing! It feels so good on the ears, and it’s insanely simple to put on. I’ve had other headsets in the past that struggle with this, but kore nailed it with the ease to replace!"

Yassir, Student Pilot

“I highly recommend the textured gel ear seals as they made a noticeable difference in comfort. They’re softer and more breathable than standard seals, which really helps on longer flights.”

Destiny, Private Pilot

KORE Aviation
Hi There 👋
We are KORE Aviation, feel free to ask us any questions.

Your Recent Orders

GOT A QUESTION

Visit our FAQs for the fastest way to get information.

VIEW FAQs

Product Support

Quick links to help you with your product:

General Spec Sheets

KA-1 Headset P1 Headset H1 Headset

Headset Guide

Your headset may come with either a single or dual volume control located on one or both ear domes. Rotate the knob to adjust the volume to a comfortable level.
If your headset includes a mono/stereo switch located in the Y-block on the main headset cable, select the setting that matches your equipment. Use the stereo position for stereo audio sources. For all other applications, use the mono position. Refer to your aircraft radio or general aviation intercom manual for guidance on the correct setting.
Your headset is equipped with either a full-flex or wire boom that can be bent and positioned for accurate microphone placement. Adjust the boom so the microphone sits at the corner of your mouth, about ⅛ inch from your lips. Do not force the boom past its natural stopping point.
Loosen the oversized thumb nut on the side of the headset by hand. Adjust the headband up or down until the ear domes fit comfortably over your ears. Tighten the thumb nut to lock the position.
Replace the ear seals if they become worn, torn, or hardened over time. To install a new ear seal, insert the lip of the seal into the groove of the ear dome. Hold the dome firmly and keep the top of the ear seal in place while working the lip into the groove around the dome. You may need to pull slightly to ensure the seal fits tightly.
Replace the headband if it becomes worn, torn, or hardened. To replace it, grasp the top liner and gently open the Velcro seam to separate it from the inner strip. Remove the old headband and insert the new one.

General Maintenance

Regular maintenance will help keep your headset performing properly and looking like new.

Do not use harsh chemicals or abrasive cleaners, and do not submerge any part of the headset in water.

Use a clean, damp cloth to gently wipe the ear cups and head pad. For heavily soiled areas, use a mild solution of water and household liquid detergent.

To clean the microphone and plugs, wipe them with a clean cloth lightly dampened with alcohol.

Ear seals and microphone muffs are replaceable and should be changed as needed when they become worn.

Returns & Warranty

Our return policy is 30 days. If 30 days have passed since your purchase, unfortunately we can’t offer a refund or an exchange. To be eligible for a return, the item must be unused and in the same condition that it was received in. It must also be in the original packaging. To complete your return, we require a receipt or proof of purchase from original store.
Once your return is received and inspected, we will send an email to notify that we have received the returned item. If it meets the requirements above, then the refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 15 business days.
Please note that banks have different processing time periods. If you haven’t received a refund in 15 business days, please check with the bank as it may still be processing. If you still have not received your refund, please contact us at help@koreheadset.com.
We only replace items if they are defective or damaged. If you need to exchange it for the same item, send us an email at help@koreheadset.com.
Warranty is limited to original purchaser and covers defects in material and workmanship for a period of five (5) years from date of original purchase. Warranty is not valid if our inspection shows that the equipment has been subjected to negligence, misuse or accident, or if it has been tampered with, installed, or altered in any way. All products must be shipped to our address, freight prepaid. Email help@koreheadset.com with a copy of your dated sales receipt and a detailed description of the problem to initiate a claim.
To return your product, please contact us at help@koreheadset.com. You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.

UNBOXING VIDEOS

Add an H1 unboxing video in the theme settings.

Send Us a Message